Checking the play in the throttle cable

- Check the throttle grip for smooth operation.
- Move the handlebar to the straight-ahead position. Move the throttle grip backwards and forwards to ascertain the play in the throttle cable.

Throttle cable play 3...5 mm

If the throttle cable play does not meet specifications:
- Adjust the play in the throttle cable.
- Start the engine and let it run idle. Move the handlebar to and fro over the entire steering range
The idle speed must not change.
- If the idle speed changes.

Warning Danger of poisoning Exhaust gases are poisonous and inhaling them may result in unconsciousness and/or death.
- When running the engine, always make sure there is sufficient ventilation, and do not start or run the engine in an enclosed space without an effective exhaust extraction system.

- Move the handlebar to the straight-ahead position.
- Push back sleeve 1.
- Loosen lock nut 2.
- Adjust the play in the throttle cable by turning adjusting screw 3.
Guideline
- Throttle cable play 3... 5 mm.
- Tighten lock nut 2.
- Slide on sleeve 1.

Checking the clutch lever play

- Check the clutch lever for smooth operation.
- Move the handlebar to the straight-ahead position. Lightly pull the clutch lever and ascertain the clutch lever play A.
Clutch lever play 1... 3.
If the clutch lever play does not meet specifications.
- Adjust the clutch cable play.
- Slide on sleeve 1.
- Move the handlebar to and fro over the entire steering range.
The clutch lever play must not change.
- If the clutch lever play changes:
- Check the routing of the clutch cable.

Adjusting the clutch cable play

- Move the handlebar to the straight-ahead position.
- Push back sleeve 1.
- Loosen lock nut 2.
- Adjust the play in the throttle cable by turning adjusting screw 3.
Guideline
- Throttle cable play 3... 5 mm.
- Tighten lock nut 2.
- Slide on sleeve 1.