Adjusting the spring pretension of the shock absorber
Danger of accidentsModifications to the suspension settings can seriously
alter the vehicle's ride behavior.
The spring pretension defines the initial status of the spring operation on the shock absorber. The best spring pretension setting is achieved when it is set for the weight of the rider and that of any baggage and a passenger,thus ensuring an ideal compromise between maneuverability and stability.
- Adjust the spring pretension by turning adjusting ring 1
|Full payload||6 clicks|
The spring pre-load can be set to 10 different positions.
Adjusting the shift lever
The adjustment range of the shift lever is limited.
- Loosen nuts 1.
- Adjust the shift lever by turning shift rod 2.
- Tighten nuts 1.
- Check the shift lever to ensure it is functioning properly and can move freely.
|Shift rod adjustment range A||100...112 mm|
Make the same adjustments on both sides.
At least five screw threads must be screwed into the seating.
Tighten nuts 1.
After the nuts have been tightened, the bearings of the shift rod must be central and aligned identically to each other in order to ensure freedom of movement in the bearing shells.